Impact of carwash discharge on stormwater quality (Toulouse, France)

The contribution of discharge from carwashes to pollutant levels in stormwater was evaluated. Five carwashes and two outlets in the city of Toulouse (France) were selected. Water samples were collected from December 2006 to December 2007. Concentrations and loadings of classical water quality parameters (conductivity, pH, turbidity, chemical oxygen demand, nitrogen, phosphorus, ammonium, nitrate, suspended solid and volatile suspended solid) and five groups of organic compounds (polycyclic aromatic hydrocarbons, polychlorinated biphenyls, lauryl alkyl benzene sulphonates, methyl tert-butyl ether and total hydrocarbons) were determined. The results suggest that the wastewater derived from carwashes was negligible compared to the volume and flow rates within the stormwater network. However, high concentrations of polycyclic aromatic hydrocarbons, phosphorus and lauryl alkyl benzene sulphonates in liquid waste from carwashes, and the impact of these pollutants on stormwater quality could not be neglected

Sand to Root Transfer of PAHs and PCBs by Carrots Grown on Sand with Pure Substances and Biosolids Amended Sand

A study on behaviour of trace organic compounds (Polycyclic Aromatic Hydrocarbons, PAH, and Polychlorinated Biphenyls, PCB) in a sand-plant system has been carried out, with the reclamation of wastewater treatment plant biosolids for agriculture in mind. Carrot plants (Daucus carota) were grown on soilless culture (sand), to provide optimal transfer conditions, in plant containers inside a temperature regulated greenhouse. There were two types of experiment. The trace organic compounds have initially been introduced as pure substances. A second experiment has been carried out under the same conditions, but using biosolids. Plant development has been unaffected by the presence of the pure substances and the biosolids. The transfer of the trace organic compounds has been followed in the peel, the core and the leaves of the carrot plants. Results obtained are expressed as fluxes of the trace organic compounds into the plant. The results clearly show that trace organic compounds accumulate in the carrot peel

Trace determination of linear alkylbenzene sulfonates: application in artificially polluted soil-carrots system

Surfactants are widely used in household and industrial products. The risk of incorporation of linear alkylbenzene sulfonates (LAS)from biosolids, wastewater, and fertilizers land application to the food chain is being assessed at present by the European Union. In the present work, a complete analytical method for LAS trace determination has been developed and successfully applied to LAS (C10–C13) uptake in carrot plants used as model. These carrots were grown in soil with the trace organics compounds added directly into the plant containers in pure substances form. LAS trace determination (μg kg−1 dry matter) in carrots samples was achieved by Soxtec apparatus and high-performance liquid chromatography-fluorescence detection. The methodology developed provides LAS determination at low detection limits (5 μg kg−1 dry matter) for carrot sample (2 g dry matter) with good recoveriesate (>90%). Transfer of LAS has been followed into the various parts of the carrot plant. LAS are generally found in the carrot leaves and percentage transfer remains very low (0.02%)

Impact of dry weather discharges on annual pollution from a separate storm sewer in Toulouse, France

The city of Toulouse with its separate sewer system is ideal for studying stormwater. However, during dry weather, the storm sewer also discharges water into the environment, and it is the impact of these discharges on annual pollution from storm sewer that is the object of this study. Samples have been taken from the outlets of two storm drains located in heavily and moderately urbanized areas. Sampling has been undertaken during wet weather and during dry weather between January 2010 and February 2011. Three dry weather and two wet weather samples have been taken every three months and from each outlet. The overall pollution parameters have been analyzed (chemical oxygen demand, biological oxygen demand, total nitrogen, ammonium, nitrate, total phosphorus, suspended solid matter, volatile suspended matter, pH, conductivity, turbidity). Characterization has been completed by analysis of trace organic compounds: polycyclic aromatic hydrocarbons, total hydrocarbons, methyl tert-butyl ether, diethylhexylphthalate, nonylphenols, hormones (estradiol, ethinylestradiol). For certain parameters, the results obtained did not conform to legislative requirements concerning discharge into the natural environment. Correlations between these parameters have been studied, and identified between several of them using principal component analysis. The most important correlation observed was between conductivity and concentration in total phosphorus for one of the outlet. Results showed that dry weather had an impact on annual pollution load from separate storm sewer and that level of urbanization was also a factor. The effect of season has been studied but no significant impact was found

Modelling of a roof runoff harvesting system: The use of rainwater for toilet flushing

The water balance of a four-people family rainwater harvesting system was calculated in a case study. The experimental water saving efficiency (WSE) was calculated as 87 %. A simple computer model was implemented to simulate the behaviour of the rainwater harvesting system. In general, the rainwater collector volumes predicted by the daily model had shown a good correlation with the experimental values. The difference between the experimental and the predicted values for the stored volume can be explained by the lack of maintenance of the system that can affect its performance. On the basis of a long-term simulation of 20-year rainfall data, the following parameters were calculated: rainfall, water demand, mains water, rainwater used, over-flow and WSE. The collection of rainwater from roofs, its storage and subsequent use for toilet flushing can save 42 m3 of potable water per year for the studied system. The model was also used to find the optimal size of the tank for the single-family household: a storage capacity of approximately 5 m3 was found to be appropriate. The storage capacity and tank size were distinguished. The importance to take into account the dead volume of the tank for the sizing was indeed highlighted

Development and validation of methods for the trace determination of phthalates in sludge and vegetables

A routine method which is simple, quick and precise has been set up and validated for phthalate analysis in environmental samples (tomato plants and sewage sludges). Six phthalates have been studied simultaneously: dimethylphthalate, diethylphthalate, dibutylphthalate, butylbenzylphthalate, di(ethyl)hexylphthalate and dioctylphthalate. Optimization of sample, solvent extraction uses a Soxtec apparatus and extract purification with an SPE cartridge allows between 90 to 110 % recovery of phthalates. Precise, sensitive and selective identification and quantifying of analytes is by GC-MS in SIM mode. This protocol allows analytes with concentrations as low as 10µg/kg Dry Matter (DM) to be determined from small (1 to 2 g DM) samples. This analytical method has been applied to the phthalate transfer study for agricultural recycling of sludges, where phthalate bioavailability has been studied in aquiculture using two types of experiments. Tomatoes have been grown in containers where the trace organics have been directly introduced as pure substances, and in a second experiment under the same growth conditions, sewage sludge has replaced the pure substances. Transfer of these trace organics has been followed into the various parts of the tomato plant and in general only the DEHP is worthy of note although its percentage transfer remains very low even in an experiment designed to maximize this

Monitoring of stormwater between 2002 and 2010. What is the evolution of stormwater quality ?

The city of Toulouse with its separate storm sewer system is ideal for studying stormwater. That is why since 2002, three stormwater sampling campaigns were conducted. Samples were taken from the outlets of two storm drains located in heavily and moderately urbanized areas. Sampling was undertaken during wet weather and dry weather during the year 2002 for the first campaign, during the year 2007 for the second one and during the year 2010 for the last one. The overall pollution parameters were analyzed (chemical oxygen demand, biological oxygen demand, total nitrogen, ammonium, nitrate, total phosphorus, suspended solid matter, volatile suspended matter, pH, conductivity, turbidity) and the presence of some micropollutants was studied (6 PAHs, MTBE and total hydrocarbons). Results showed an evolution of stormwater quality between the three campaigns and an improvement of nutrient and suspended solid concentrations. They indicated also that dry weather had an impact on annual pollution load from separate storm sewer and that level of urbanization was also a factor whatever the year of sampling

Life cycle analysis for the cultivation and combustion of miscanthus for biofuel compared with natural gas

As negative environmental and economic impacts of fossil fuels have escalated, so has the importance of renewable bioenergy crops whose feedstocks are noncompetitive with food supplies. Compared with fossil fuels, use of lignocellulosic feedstocks offers potential for greenhouse gas reduction and highly positive net energy returns because of low input demand and high yields per unit of land area, thus making them advantageous for the emerging biofuel industry. The aim of this study was to simulate environmental impacts of producing a biofuel grass for combustion use based on the inventory of inputs and their effects on eutrophication of surface waters; acidification of land and water; photochemical ozone-creation potential (i.e. smog); global atmospheric warming; and nonrenewable resource depletion (mainly fossil fuels). Hybrid miscanthus (Miscanthus x giganteus, or giant miscanthus), a perennial C4 grass originating from East Asia, was compared with natural gas by using a life-cycle analysis model for biomass production in France. The analysis showed a trade-off between natural gas and miscanthus. The latter had a lower global-warming potential and consumed less primary nonrenewable energy but produced more emissions that promote acidification and eutrophication than did natural gas

Monitoring of water quality from roof runoff: Interpretation using multivariate analysis

The quality of harvested rainwater used for toilet flushing in a private house in the south-west of France was assessed over a one-year period. Temperature, pH, conductivity, colour, turbidity, anions, cations, alkalinity, total hardness and total organic carbon were screened using standard analytical techniques. Total flora at 22°C and 36°C, total coliforms, Escherichia coli and enterococci were analysed. Overall, the collected rainwater had good physicochemical quality but did not meet the requirements for drinking water. The stored rainwater is characterised by low conductivity, hardness and alkalinity compared to mains water. Three widely used bacterial indicators - total coliforms, E. coli and enterococci - were detected in the majority of samples, indicating microbiological contamination of the water. To elucidate factors affecting the rainwater composition, principal component analysis and cluster analysis were applied to the complete data set of 50 observations. Chemical and microbiological parameters fluctuated during the course of the study, with the highest levels of microbiological contamination observed in roof runoffs collected during the summer. Escherichia coli and enterococci occurred simultaneously, and their presence was linked to precipitation. Runoff quality is also unpredictable because it is sensitive to the weather. Cluster analysis differentiated three clusters: ionic composition, parameters linked with the microbiological load and indicators of faecal contamination. In future surveys, parameters from these three groups will be simultaneously monitored to more accurately characterise roof collected rainwater

Optimisation of pressurized liquid extraction using a multivariate chemometric approach for the determination of anticancer drugs in sludge by ultra high performance liquid chromatography–tandem mass spectrometry

The present paper describes an analytical method for the determination of 2 widely administered anticancer drugs, ifosfamide and cyclophosphamide, contained in sewage sludge. The method relies on the extraction from the solid matrix by pressurized liquid extraction, sample purification by solid-phase extraction and analysis by ultra high performance liquid chromatography coupled with tandem mass spectrometry. The different parameters affecting the extraction efficiency were optimized using an experimental design. Solvent nature was the most decisive factor for the extraction but interactions between some parameters also appeared very influent. The method was applied to seven different types of sludge for validation. The performances of the analytical method displayed high variability between sludges with limits of detection spanning more than one order of magnitude and confirming the relevance of multi-sample validation. Matrix effect has been determined as the most limiting analytical step for quantification with different extent depending on analyte and sludge nature. For each analyte, the use of deuterated standard spiked at the very beginning ensured the complete compensation of losses regardless of the sample nature. The suitability of the method between freshly spiked and aged samples has also been verified. The optimized method was applied to different sludge samples to determine the environmental levels of anticancer drugs. The compounds were detected in some samples reaching 42.5 μg/kgDM in ifosfamide for the most contaminated sample